17 Reasons Why You Should Ignore Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window repairs has been damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you'll need locate some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

If you plan to try to remove the window panes yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled under.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap between the door and the window is large, you might need to consider a security screen that also has an opening. This will give you the best of both.

2. Sagging

upvc window repair near me windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues such as sagging. A sagging uPVC windows could cause issues with light, draughts and even security. It is crucial to act when you discover that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sliding. First, you'll need to unblock the windows so you can get at the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.

If you can't reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. The majority of the time it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. You'll first need to close the window and do an initial fitting. The corners of the sash should align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is essential to take action if wake up every morning to find a smoky wall and wet floors. Water leaks from windows are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how serious the issue is, the old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes do not have debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. These are easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to replace a hinge on a window but it's much easier if someone helps you hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to inadequate installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are more than happy to give suggestions.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window repairs sticking and prevent corrosion. It is recommended to perform this every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also be disaligned as a result of wear, which can cause a gap between the frame and sash. This can be easily repaired by giving them a good clean, but when they're beyond repair, it may be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, can also be misaligned, and again it may be feasible to give them a clean but in some cases it might be necessary to have these replaced.

The next common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce the risk of draughts.

One of the most effective ways to cut down on draughts is by using a draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. They will help block out cold air and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it may be cheaper to replace them rather than repair them. So, if you're having issues with your upvc window repair near me windows, it's recommended to seek help from a professional as soon as possible.