10 Saab 9-3 Key Replacement Tricks Experts Recommend

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of specific steps to add a second ignition key. This requires an electronic handheld computer, referred to as Tech-2 which is used by the dealer. Then it is necessary to purchase a new transponder. key are required to be purchased.

Change your keys regularly to prevent one from deteriorating faster than the next. This will help to keep your keys in pristine condition.

Replacement Case

The new key fobs for keys are not like the older saab 9-3 key not accepted contact service keys. They are equipped with electronics that make them difficult to duplicate. This has made car theft considerably more complicated than it was 20 years ago. However, it has made replacing lost keys an incredibly expensive undertaking.

Saab 9-3 owners must have two keys working. It is costly to replace a lost key, as it requires replacing the CIM module, and programming the locking cylinders. Dealers usually charge between $100 and $200 for this.

There are ways to cut down on these costs. Some parts dealers will find the code on an extra key (usually the same one that opens the doors and switches the ignition) and cut a brand new key blade out of metal for less than the dealer's cost. The key must, however, be the same as the original in order to function in your car.

You can also change the case yourself by following these steps. You'll require a flathead and a lot of patience. With the screwdriver, break apart the plastic, and then take off the emergency key. Once the case is opened, take out the electronics and put them in the new case. Insert the correct key and badge inside the case.

Replacement Battery

The replacement battery for the Saab 9-3 is a cheap part that can be replaced quickly and easily. This YouTube video by Cyclone Cyd demonstrates how to replace the battery of the remote fob with just four steps. This tutorial is compatible with any modern saab 9-3 key not accepted contact service key fob. However, the procedure might differ slightly.

The button is normally located next to the saab key replacement cost key code (check out this site) logo on the back of the fob. It is usually located near the saab replacement key programming logo on the back of the fob. Then you will need a flathead screwdriver to insert into the small hole inside this button. This should be enough to open the case in order to change the battery.

After you have installed the batteries CR1632, it is possible to reassemble your remote key fob. Then, you can program it into your car. The entire process should not take more than an hour. It's a simple process that does not require any special equipment.

The procedure is a little more complicated in the event that you lose the key, but it's possible. The dealer must first read the VIN of the vehicle and order an additional TWICE module and key blade with the proper unique code. The dealer will then need to program the key using MDI which is a new software tool.

Replacement Key Fob

The key fob contains batteries that are used to lock and unlock your car. Batteries have a limited lifespan and will eventually die. This is a problem that happens to all cars and the good news is that you can change the batteries in a majority of fobs, without replacing the whole case. You can purchase replacement fobs from Amazon that come with all the electronic components already in place, so you'll just pop open the case and replace the batteries that were in the case. You will need to remove the emergency key before you can replace the batteries. To do this, you need to insert a small flathead screwsdriver into the slot that is in the middle. The screwdriver should be moved around the case, and it will split open, making it simple to remove.

When you are ready to replace your keys, ensure that you have a spare, because this can cut down the total cost by a substantial amount. If you have spare keys, you can ask the dealer to cut a new key and program it to your car, which is cheaper than replacing the entire key fob.

It is possible to add a second key to your vehicle if you don't already have one, but it takes a great deal of research and effort. It costs a few hundred bucks to add an additional car key. The computer in the car must also be programmed. Professionals can accomplish this however it's a costly option.

Replacement Ignition

The latest SAAB 9-3 has an advanced alarm system that is based on a key code. This means that if you lose your only functioning key, getting another one could be very expensive because the car needs to have a computer module installed, and it must also be specifically designed to accept a different key. Even dealers can charge hundreds of dollars to program an entirely new key, if they are unable to complete the task.

If you've lost your sole working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) to create a replacement, and they will charge you a premium price for it. Instead we can reprogram the EEPROM on your existing car computer to allow it to be programmed for a replacement key, slashing over 50% of the price you pay at a dealership.

If you've been a faithful owner of an 03-11 saab key fob programming 9-3, then you likely are aware that the ignition key isn't the most durable. They can become extremely sticky, and the buttons are known to fall off of them at times and you should think about getting a replacement if yours isn't working properly. It's not as difficult as it appears to replace the ignition key. With the proper tools, it can be accomplished in a short time.