This Is The Myths And Facts Behind Saab 9-3 Key Replacement

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct procedure to add an additional key. It requires dealer service using a handheld computer called Tech-2. Then a new car key and transponder must be purchased and programmed to the car.

Rotate your keys to prevent one from deteriorating faster than the other. This will help keep your keys in pristine condition.

Replacement Case

The new key fobs aren't like the older Saab keys. They have electronics that make it difficult to copy. This has made car theft a lot more complicated than it was 20 years ago. However, it has made replacing lost keys a much more expensive undertaking.

Every owner of a 9-3 Saab should have at least two functioning keys. If one is lost, it costs a lot of money to add another to the car, as it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100 and $200 to do this.

There are ways to reduce the high price. Some parts suppliers will look up the code from a spare key (usually the same one that opens the doors and turns on the ignition) and cut a brand new metal key blade at only a fraction of the dealer's cost. The key must be the exact same as the original in order for it to function in your vehicle.

Follow these steps to replace the case. You will need to have a flathead and patience. Using the screwdriver, slowly tear the plastic away and then separate the emergency key from the case. Once the case is open, remove all electronics and put them back in your new case. Make sure you put the correct key and badge back into the case, as well.

Replacement Battery

The saab 93 key fob replacement 9-3 replacement battery is an inexpensive component that can be quickly and easily replaced. This YouTube video from Cyclone Cyd demonstrates the procedure for replacing the battery for the remote fob in only four steps. This tutorial can be used for any modern saab key fob, however the procedure might differ slightly.

The button is typically located just below the saab 9-3 key not accepted contact service logo on the back of the fob. This button is usually located just below the Saab logo on the back of the fob. Next take a flathead screwdriver to insert into the tiny hole in this button. This should be sufficient to open the case so that you can replace the battery.

Once the new CR1632 battery is in place You can then reassemble the remote key fob, and then program it to your car. The entire process should not take more than an hour at most. It's a simple procedure that doesn't require any special equipment.

The procedure is a little more complicated if you lose your key, but it's possible. The dealer must read the car's VIN and then request a replacement key blade and TWICE module with the correct unique code. The dealer will then need to program the key using MDI, a brand new software tool.

Key Replacement Fob

The key fob has batteries that are used to lock and unlock your vehicle. Batteries have a limited lifespan and will eventually fail. It is a common problem with all cars. The good news is that you can replace the battery on most key fobs, and not have to replace the entire case. You can buy replacement fobs on Amazon that have all the electronics already installed, so you'll be able to simply open the case and replace the batteries that were in the case. It's important to note that you'll have to take out the emergency key first. you can do this by inserting a small flathead screwdriver into the slot located in the middle of the case. Move the screwdriver around the case, and it should split open, making it easy to take it out.

If you're ready to replace your keys, have an extra set on hand. This will save you a significant amount of money. If you have an additional key, you can ask the dealer to cut it and program it for your car. This is much less expensive than purchasing a new key fob.

It is possible to add a second key to your vehicle in the event that you don't have one, however it requires a great deal of research and effort. It costs around a hundred dollars to add a second car key. The computer of the car must also be programmed. This can be done by a professional, however it's a costly option for the majority of owners.

Replacement Ignition

In contrast to earlier Saab vehicles, the latest saab key fob repair 9-3 models have an upgraded alarm system that is built around a coded key. If you lose your only key, it can be costly to get another one since the car needs to be equipped with a specific computer and also be programmed to accept a new key. Locksmiths typically aren't able to program this or even dealers can charge several hundreds of dollars just to program the new key!

If you've lost your sole working key, a dealer will repair your car's computer (known as the CIM or saab 93 key replacement TWICE) to make a replacement, and will charge you the highest price for it. Instead, we can reprogram the EEPROM on your existing car computer to allow it to be programmed to accept a second key, saving you over 50% of what you'd spend at a dealer.

If you have owned a 9-3 from SAAB for quite a while you're aware that the ignition keys are not very durable. They can become incredibly sticky and the buttons can fall off occasionally, so you should consider getting a replacement if yours isn't working properly. The good news is that replacing the ignition key isn't as difficult as it sounds and can be done fairly quickly using the proper tools.