Why Everyone Is Talking About Door Handle Replacement Right Now

Door Handle Replacement

It's worth replacing door handles if you don't like the way they look, or if they're difficult to use. Installing the new handle on your door is easy if you have patience.

Most modern door handles have cover plates that conceal the screws to give them a beautiful appearance. If your new handle does not have screws already attached, you will have to attach them separately.

Remove the old Handle

Door double glazed handles are not only important for their aesthetic value to your home, but they're vital for safety since they let you lock and unlock your door. However, as time passes the door handle could lose its grip, feel loose, or appear old and worn. This is a clear indication that it's time to replace the door handle.

One of the first signs that your door handle requires replacing is the fact that it is becoming difficult to operate. This is an issue because it means that you can no longer lock or unlock your door, which could create a security risk for you and your family.

Another reason to replace your door handle is if it's damaged or broken. A damaged or broken door handle can be dangerous, especially for elderly or children members who struggle to open it. They could be trapped. Fortunately, it's fairly simple to fix a damaged door handle by simply replacing the handle that was broken.

Modern door Handles for patio doors are generally standard sizes and should fit any door. If you're not certain that your new door handle will work, take out the old one and measure its housing holes. This will enable you to purchase the right size door handle.

It is the easiest method to remove the door handle by unscrewing it from the door. Usually, a screwdriver is used. Some door handles come with the cover plate, which conceals the screws used to mount them. You'll need to remove the cover plate to gain access to the screws. After you have removed the old handle, make a note of the way the spindle is attached. This will help you align the new handle.

Alternately, you can take off your door handle by unscrewing it from the latch mechanism. You can make use of a screwdriver to take off the door handle. But, you'll have to locate the small latch which is located on the edge trim piece. Once you've removed the latch, take the handle off the strike plate and then remove the latch away from the door's edge.

Take off the Strike Plate

You'll need to replace the latch plate after replacing the handle. It's the plate that is the one that holds the hole in which the latch of the door hooks when the door is closed. The packaging that the new handles are packaged in will have two options for latch plates: either a rectangular or circular (see the above diagram that outlines the parts of the door handle). If your current latch plate has a rectangular shape, switch it to a round one, so that the latch hooks onto the strike plate in a way that makes the handle easier to operate.

The first step is to unhook the screw holding the latch plate. The screws are usually quite tight and require a bit of force to loosen them. If possible, it may be beneficial to have another person assist you with this task.

The latch plate should lift itself out of the door after the screws have been removed. If it's stuck or won't move then use a small nail file to scrape the edges of the latch plate. This can sometimes free up the plate.

Now you can move on to making the new door strike plate to be installed. Screw the latch plate into the doorjamb using the wood screws that were included with the new handles. Do not tighten the screws too much as this could damage the strike plate.

If you are not sure whether the latch plate is in the correct position, shut and open the door to determine if it latches and closes properly. If it doesn't then you'll need to adjust the strikeplate either up or down or forward or back until the door locks correctly.

If the door is still moving or jiggles, you may have to expand your latch hole on the strike plate. This is more prevalent on older doors. It can be caused by wear and tear, hinges that are too narrow, the incorrect size of the latch or damaged strike plate. If this is the case, follow the exact procedure as adjusting the strike plate, using a metal file instead of a chisel and hammer.

Removing the Latch

The latch is a bent metal piece which slides in and out of a hole in the inside of your door. When you turn the handle, it pushes the latch forward which allows you to open the door. It also hooks into an opening in the frame of the door to keep your door shut. If your door shakes when you close it, replacing upvc window handles the latch may be the only thing needed to fix it.

It's difficult to identify the screws that secure the latch to the door, however there's usually a small hole on the trim plate that lets you to insert a screwdriver and pry it off. After you've removed the trim plate, it should be easy to remove the latch as well as the remaining bolts that hold the latch and spindle in the position.

If the latch is not easily removed then use a paperclip tool to take it off the handle mechanism. Place the item into the recessed latch slot and gently twist it or jiggle until the that the latch and handle begin to separate. It may take this several times before the latch is loose enough to let it out.

After the old latch has been removed it should be possible to move the new latch into the slot without any issues. Make sure that the latch is correctly positioned in the slot and is aligned with the screw chambers, and then use your new screws to secure it to the strike plate and door frame.

Take note of the backset (the distance between the center of the large hole in the door's front and the edge) prior to installing the new handle. Make sure that the size of the latch of the new handle matches the measurement.

If you're replacing the latch or handle or handle, or if the old lock cylinder is damaged then you'll require an entirely new one. If you're not switching locks, a new lock should fit into your existing recess, and work with your current keys. Select a latch with rectangular cover plates to match your existing handles.

Then remove the Cover Plate

You can replace your old door handles with a new lever and rose design to make a difference in the appearance of your house. You can purchase complete sets that include privacy adaptors, escutcheons, and escutcheons.

The first step in replacing an internal door handle is to remove the cover plate or rose, which hides the screws and mechanism inside. Find an opening tab on the plate, and make use of a flathead screwdriver to lift it off the knob. It could have an opening on one edge or be held in place by a pin.

After the cover plate is off take off the screw that holds the interior handle in place, and then set it aside. It is also necessary to remove the screws that are holding the latch and the plates inside and the latch plate, which can be done by loosening them using a Philips screwdriver. Then, take the inner plates and latch plate from the door and set them aside.

Most doors have gaps between the door jamb and the edge of the frame, which allows for a handle, however not all have. If yours does not have a handle, you'll need to drill a hole in the door for the new handle. The procedure to do this is the same as opening a door using locks, but you'll be taking extra care not to harm the frame or door.

Installing new sliding door handles knob screws is required after the holes have been drilled. Make sure to buy the same size as the old ones, to ensure that you won't have an handle that is either too tight or loose. Installing a new strike rod and latch is also mandatory. They aren't included in all door handle sets.

If you're looking for a high-quality replacement interior door handle set look no further than the Amazon's Choice FAERSI two-piece chrome finish handle set. It is a factory-fit and has received hundreds of 5-star reviews. It's a great option to replace window handles worn or damaged door hardware on your Chevy.