Why Subaru Car Keys Should Be Your Next Big Obsession

How to Programming a Subaru Key Fob at Home

The key fob to be programmed by an auto locksmith or subaru key fobs dealer, based on the age of your subaru smart key replacement is. This is accomplished by connecting a computer programming machine to your car.

To program your Subaru, unlock the driver's side door using the door button, and then close it. You will hear a chime and see the dome lights flash on the instrument panel.

Step 1: Locate the circuit board on your transmitter

There are several ways to program your key fob. First, you need to determine the kind of key fob you own. This can be done by looking at the form of the key fob, or by listening to the chime in your car.

Once you have this information, you can begin the process of programming your key fob at home. You will need an flathead and a steel key to accomplish this. The key fob can be opened by twisting. Then, push the metal key in and release the battery from the tiny tabs that secure it. Replace the battery with a fresh one and put the key fob case back together.

Step 2: Disconnect the key fob case

Change the battery is a good idea since it could revive key fobs that aren't working anymore. In some instances, the buttons on the key fob may be broken. If you notice that the contacts made of metal on the button have come loose, try soldering them in place again in order to make them work again.

Make sure that you shut off your ignition and close your doors prior to you begin. Close the door on the driver's side and press your door button 10 times in rapid succession. After that, you'll hear the instrument panel chime and your dome lights should flash. This means you're ready move on.

Step 3: Insert the Key Fob in the ignition

Many websites will tell you how to program your new or replacement Subaru keyfob at home. But, the majority of them don't offer specific instructions. Reprogramming an electronic lock is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your subaru car key with the engine off and all doors shut. Open the door button control and use it to unlock all doors. Open and close the driver's door twice more. Then insert and remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system should sound chirps to confirm that the settings have been changed.

Step 4 Step 4: Turn on the ignition

It is crucial to understand that this method of programming a key fob only works if you already have a functioning key. If you don't then a dealership or auto locksmith will be required to program a new key for your Subaru in Fort Bliss.

Once your key has been programmed and you are able to start your car in around five seconds. Begin by closing all doors and shutting off the engine. Next, sit in the driver's seat and open all doors using the door button control. Insert the key into the ignition and turn it to the first position. The electrical systems will be activated, however, the engine will remain off. Repeat this procedure ten times.

Step 5 Step 5: Lock the Door of the Driver's Door

Subaru offers a wide range of luxury cars with key fobs which lock and unlock doors, turn on the engine, and even defrost windows. However, sometimes, these devices aren't working as they should.

To fix the issue to fix it, you must contact an expert locksmith or dealer. This will resolve the issue and ensure that your vehicle is safe.

To accomplish this, open the driver's door and close it. Place the key in the ignition and turn it until it is in position 1. Then, return it to the off position. Repeat this ten times one row as fast as you can. After ten times, you should hear a sound.

Step 6 Step 6: Press the Lock/Unlock buttons on the driver's Door

The procedure to replace the battery inside the Subaru remote key fob is easy. Remove the fob's exterior case. Use a flathead to pry the casing open inside and take out the old batteries.

After taking the battery out and replacing it with the new one. Close the case. Sit in the driver's chair and open all doors using the door button control. Place the key in ignition and turn it so that the electrical system is turned on, but the engine is off. Repeat this 10 times until you hear the chime from the instrument panel. This will turn the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button.

For some owners, the annoyance chirp heard when locking and unlocking a Subaru key fob from outside can be distracting. In some instances you can deactivate the chirp by opening and shutting all doors by double-clicking the lock button on your key fob.

Switch off the ignition and shut all the doors as well as the lid of the fuel-filler. For 10 seconds you need to press and hold the lock button on the key fob. The instrument panel emits a sound when this is done. The chime signals that the door and fuel-filler lid are locked. It is possible to change the setting so that the doors lock automatically and without the need to press a switch.

Step 8 Step 8: Enter the 8 Digit Transmitter Number.

Note down the initial series of 8 digits and keep it handy. Then, get into your driver's seat, close all doors and turn the ignition to the first position (towards on). After ten turns your instrument panel will sound once.

The circuit board for the transmitter is in the key fob's case. There should be one or two sets of numbers (8-digits) on the circuit board. Follow the steps in the guide to register the code. This procedure may require a visit to the dealer for older models.